HEPG IPN INDEX AS OF 12/7/98


CAPACITOR NUMBERING SYSTEM A X X X XXX X ______________________| | | | | |_________________________________ | | | | |_________________________________ | CAPACITOR | | |____ | | --------- | | | | | ____________________| | LEAD SPACING | | | | ------------------------------------ | | BODY STYLE/MATERIAL | 1. .1 INCH 6. .375 INCH | | ------------------------------ | 2. .125 INCH 7. .5 INCH | | A. DIPPED SOLID TANTALUM | 3. .2 INCH 8. .6 INCH | | B. TUBULAR SOLID TANTALUM | 4. .25 INCH 9. .7 INCH | | C. MOLDED SOLID TANTALUM | 5. .3 INCH 0. UNSPECIFIED | | D. | | | E. E. | EXCEPTION: When used for chip | | F. | capacitors (Second digit "N" or "O") | | G. CERAMIC DISC | use this digit to denote body size | | H. DIPPED CERAMIC MONOLITHIC | and/or style as follows: | | I. NON-DIPPED MONOLITHIC CER. | ------------------------------------ | | J. ULTRA STABLE CERAMIC (NPO) | A. 0603 B. 0805 C. 1206 | | K. | D. 1210 E. 1808 F. 2010 | | L. D.I.P. (2 PINS) | G. 2512 H. 7343 I. | | M. D.I.P. (16 PINS) | J. K. L. | | N. CERAMIC CHIP | Z. UNSPECIFIED OR SPECIAL | | O. TANTALUM CHIP | | | P. POWERLYTIC ELECTROLYTIC | | | Q. TVA ATOM ELECTROLYTIC | | | R. METALIZED FILM | _______________________________| | S. SILVER MICA | | | T. TUBULAR POLYSTYRENE | CAPACITANCE (IN Pf & Mf) | U. ALUMINUM ELECTROLYTIC | -------------------------------------- | V. MULTILAYER CERAMIC | The first two digits are significant | W. | numbers, and the third is a multiplier. | X. | EXCEPTION: "9" is used in lieu of a | Y. | multiplier for 1.0 through 9.9 Pf. | Z. | | | VALUE IN Pf CODE | VALUE IN Uf | _______________| ----------- | ---- | ------------------ | | 1 | 109 | | MAXIMUM VOLTAGE 10 | 100 | | -------------------------------- 100 | 101 | | A. 6 VOLTS N. 300 VOLTS 1,000 | 102 | .001 | B. 10 VOLTS O. 400 VOLTS 10,000 | 103 | .01 | C. 15 VOLTS P. 500 VOLTS 100,000 | 104 | .1 | D. 20 VOLTS Q. 600 VOLTS 1,000,000 | 105 | 1 | E. 25 VOLTS R. 750 VOLTS | 106 | 10 | F. 30 VOLTS S. 1,000 VOLTS | 107 | 100 | G. 35 VOLTS T 1,500 VOLTS | 108 | 1,000 | H. 50 VOLTS U. 2,000 VOLTS | I. 75 VOLTS V. 3,000 VOLTS ___________________________________| J 100 VOLTS W. 4,OOO VOLTS | K. 150 VOLTS X. 6,000 VOLTS TOLERANCE (No entry for 20% or more) L. 200 VOLTS Y. 10,000 VOLTS ------------------------------------------- M. 250 VOLTS Z. MISCELLANEOUS F. 1% G. 2% J. 5% K. 10% Z. BACK TO TOP
BATTERY & ASSOCIATED EQUIPMENT NUMBERING SYSTEM BA X X XXXXXX ______________________| | | |___ | | | | BATTERY, ETC. | | IDENTIFICATION ------------- | | ----------------------------------------- _____________________________| | 1. FOR COMMON BATTERIES: Use four digits | | to indicate voltage in volts and tenths | | of volts at full charge (i.e. a "D" DRY | | CELL will be coded "BAEN0015"). TYPE | 2. FOR SPECIALTY BATTERIES: Use up to six -------------------------------- | digits of the MPN (i.e. A rechargeable AAA A. "AAA" DRY CELL | Dry Cell battery with MPN "0170" will be B "AA" DRY CELL | coded"BASY0170"). C. "A" DRY CELL |_____________ D. "C" DRY CELL | E. "D" DRY CELL CHARGABLE OR RECHARGABLE F. ----------------------------------------- G. N. NO Y. YES Z. N/A H. S. SPECIAL BATTERY Z. BACK TO TOP
BEARING NUMBERING SYSTEM BG X XXXXXXX _______________________| | |__ | | | BEARING | IDENTIFICATION ------- | ------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. BERRY BEARING CO O. C. P. M. Z. BACK TO TOP
CABLE NUMBERING SYSTEM CA X XXXXX XX ________________________| | | |___________________________________ | ____________________| |___ | CABLE | | | ----- | CONFIGURATION | _______| ----------------------------------------- | | Two figures and either a "P" for Pair or | TYPE an "X" for a single conductor, followed | ------------------------------- by the AWG in two figures. A "99" in | A. 50 OHM CO-AX either the type of construction or the | B. TELEPHONE AWG indicates special construction (i.e. | C. CORD SET a 26 pair cable of AWG#30 would be coded | D. RIGID CO-AX "..26P30.." and a 3 conductor AWG#18 | E. ETHERNET (See EXCEPTION) cable would be coded "..03X18.."). | F. FLAT SINGLE COLER IDC | G. FLAT MULTI-COLOR IDC EXCEPTION: Numbers beginning "CAE" or | H. TWIST & FLAT "CAZ" will be followed by up to seven | I. digits of the MPN. | J. CO-AX | K. COLOR CODED _______________________| L. | M. MULTI-CONDUCTOR ADDITIONAL INFORMATION (Jacket Material) N. ------------------------------------------- O. 01. Neoprene 02. Teflon P. POWER 03. Polyethylene 04. Solid Copper Q. ROUND 05. PVC 06. Rubber R. ROUND JACKETED SHIELDED 07. 09. N/A S. ROUND JACKETED FLAT T. ROUND TWISTED PAIR U. ROUND JACKETED SHIELDED FLAT W. WELDING Z. SPECIAL APPLICATION (See EXCEPTION) BACK TO TOP
CABINET & CHASSIS NUMBERING SYSTEM CC X XXXXXXX __________________| | |__ | | | CABINET & CHASSIS | IDENTIFICATION ----------------- | ------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. AMCO N. NUCLEAR DATA B. BIVAR O. C. C & H DISTRIBUITORS INC P. POMONA D. DAWN VME Q. E. EQUIPTO R. AKRO-MILS F. PRECISION METAL FABRICATION S. SCANBY/ZERO G. T. STANDARD ENGINEERING H. U. BUD I. V. VECTOR J. W. K. KINETIC SYSTEMS X. BACK TO TOP
CHOKE & DELAY LINE NUMBERING SYSTEM CD X XXXXXXX __________________| | |__ | | | CHOKE & DELAY LINE | IDENTIFICATION ------------------ | ------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. O. C. ESC ELECTRONIX CORP. P. PULSE ENGINEERING, INC D. DATATRONICS Q. E. ENGINEERED COMPONENTS CO. R. RHOMBUS INDUSTRIES F. FERROXCUBE CORP. S. STAKPOLE G. DATA DELAY DEVICES T. TDK CORP. H. U. I. V. J. JBM ELECTRONICS, INC. W. K. X. L. Y. M. Z. BACK TO TOP
COMMERCIAL CIRCUIT NUMBERING SYSTEM CK XXXX XXXXXXXXXX _________________| | |__ | | | COMMERCIAL CIRCUIT | IDENTIFICATION ------------------ | ----------------------------------------- ________________________| Assign up to ten characters of the MPN. | MANUFACTURER CODE ---------------------------------------------------------------------------- Assign up to four characters of the Manufacturer's Code. The Manufacturer's Code can be obtained from the Manufacturer/Distributor Index. For Example: CKGRNSVIPC616 -- Commercial Circuit Board from Greenspring Computer company with a MFG Number of VIPC616. BACK TO TOP
CONNECTOR-MULTIPLE NUMBERING SYSTEM CM XXX X X X X X _________________| | | | | | |_______________ | | | | | |_________ | MULTIPLE CONNECTOR | | | |__________ | DESCRIPTION (3) ------------------ __________| | | || ------------------------ __________| __________| | || A. W/EARS & DETENT | | _| || B. W/O EARS & DETENT NUMBER OF CONTACTS | | || C. SOLDER "EYE" PINS ---------------------- | CONTACT ARRANGEMENT || **D. W/MOUNTING FLANGES Enter the number of | ------------------- || **E. W/O MOUNTING FLANGES rows of contacts and | USE A-Z WHEN MAKING NEW || F. W/LOCKING MECHANISM the number of contacts | IPN-CONTINUE TO USE 1-0 || G. W/CENTER KEY per row (i.e. 2 rows | FOR OLD IPN || H. of 20 contacts each | || I. will encode "220"; | || J. 1 row of 7 contacts | 1. .1" SPACING || K. CABLE PLUG will encode"107"). | 2. .156" SPACING || L. CABLE CONNECTOR | 3. 1 MM SPACING || M. CHASSIS MOUNT INLET EXCEPTION 1: Hardware | 4. .05" SPACING || N. CHASSIS MOUNT OUTLET & accessories will be | 5. .1" SPACING || O. FOR 30-26 AWG WIRE coded "CMH" followed | 6. .156" SPACING || P. FOR 26-22 AWG WIRE by up to seven digits | **7. .1"GRID || Q. FOR 22-20 AWG WIRE of the Mfg. P/N. | 8. 1 MM SPACING || R.RFI SHIELDING | 9. .1" SPACING || S. EXCEPTION 2: Total | 0. IRREGULAR SHAPE OR || T. TELEPHONE JACK contact count of all | SPACING || U. TELEPHONE PLUG irregularly shaped | A. 1MM SPACING || V. 90 DEG EJECTORS connectors will be | B. .05" SPACING || W. coded in 3 figures | C. 1.55MM SPACING || X. BREAKAWAY (i.e. a 50 pin "D" | D. 2MM SPACING || Y. connector will encode | E. 2.5MM SPACING || Z. NOT APPLICABLE "050"). | F. .1" SPACING || | G. .125" SPACING || | H. .156" SPACING || | Z. NOT APPLICABLE || _______________| _________________||_______ | | | CONNECTOR TYPE DESCRIPTION (1) DESCRIPTION (2) ------------------------ --------------------------- ----------------------- A. PC RECEPT, SOLDER **A. 90 DEG, W/LONG EJECT. **A. 4 WALL W/GUIDE B. PC RECEPT, W/W **B. 90 DEG, W/O EJECT. B. 4 WALL W/O GUIDE C. PC RECEPT, SFC MOUNT C. 90 DEG "D" CONN. C. UNSHROUDED **D. PC PLUG, SOLDERTAIL D. 90 DEG METAL HSNG. D. BACK COVER E. PC PLUG, W/W E. 90 DEG PLASTIC HSNG. E. EJECTION COVER F. PC PLUG, SFC MOUNT F. 45 DEG METAL HSNG. F. LOW PROFILE G. CABLE RECEPT, SOLDER G. 45 DEG PLASTIC HSNG. G. FOR .062" PIN/SOCKET H. **H. STRAIGHT W/LONG EJECT. H. FOR .093" PIN/SOCKET I. CABLE RECEPT, CRIMP **I. STRAIGHT W/O EJECT. I. OPEN END COVER J. CABLE RECEPT, IDC J. STRAIGHT "D" CONN. J. CLOSED END COVER K. CABLE PLUG, SOLDER K. STRAIGHT METAL HSNG. K. LEFT END OPEN L. CABLE PLUG, CRIMP L. STRAIGHT PLASTIC HSNG. L. RIGHT END OPEN M. CABLE PLUG, IDC M. W/STRAIN RELIEF M. BOTH ENDS OPEN N. CABLE PLUG, SCREW N. W/O STRAIN RELIEF N. BOTH ENDS CLOSED O. EDGECARD, SOLDER O. COMPONENT HEADER O. ROUND W/GUIDE P. EDGECARD, T'POINT P. MALE CENTER FASTENER P. 3 WALL W/GUIDE Q. EDGECARD, W/W Q. FEMALE CENTER FASTENER Q. R. EDGECATD, IDC R. COVER R. RFI SHIELDING S. CONTACT HOUSING S. BARRIER/TERMINAL STRIP S. T. PLUG T. T. U. POWER RECEPTACLE U. U. V. BULKHEAD V. PLUG/SOCKET KEY V. Z. NOT APPLICABLE Z. NOT APPLICABLE Z. NOT APPLICABLE ** = PREFERRED CONNECTOR FOR USE WITH BOM GENERATION WITH THE VERIBEST SOFTWARE SUITE. BACK TO TOP
COMPUTER - HARDWARE/SOFTWARE AND SUPPORT CO XXXX XXXXXXXXXX ____________| | |_____ | | | COMPUTER HARDWARE & SUPPORT | IDENTIFICATION --------------------------- | --------------------------------------- ________________________| Assign up to ten characters of the MPN. | MANUFACTURER CODE ---------------------------------------------------------------------------- Assign up to four characters of the Manufacturer's Code. The Manufacturer's Code can be obtained from the Manufacturer/Distributor Index. For Example: COPARCPROENGIN -- Commercial Circuit Board from Parametric Technology Corp.with a MFG Number of PROENGIN (The MFG Number is really PRO-ENGINEER but we can only use ten of the twelve digits.) BACK TO TOP
CRYSTAL NUMBERING SYSTEM CR X XXXXXX X _______________________| | | |_____________________ | | | | CRYSTAL ___________________| | CASE STYLE ------- | | -------------------- _____| ______________| A. CASE STYLE 18 | | B. TYPE F-700 MULTIPLIER FREQUENCY C. TYPE F-605 -------------- ---------------------------------------- D. D.I.P. K. KHz Use these six digits to indicate the S. SURFACE MOUNT M. MHz frequency of the crystal (i.e. an 8MHz crystal in a DIP package will be coded "CRM08.000D" and a 250KHz crystal in CASE STYLE 18 will be coded "CRK250.00A"). BACK TO TOP
CONNECTOR-SINGLE NUMBERING SYSTEM CS X XXXX __________________| | |____ | | | SINGLE CONNECTOR | IDENTIFICATION ---------------- | ------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. | | EXCEPTION: APPEND AN UNDERSCORE("_") AND A | NUMBER TO INDICATE THE NUMBER OF PINS CUT | FROM A SINGLE CONNCECTOR. IE. CSB0001_1 IS | A SINGLE PIN CUT FROM BERG STICK CSB0001 | MANUFACTURER ---------------------------------------------------------------------------- A. AMP N. PANDUIT B. BERG O. HOROSE C. CABLETRON P. AMPHENOL D. GRAYBAR Q. LEMO E. ELFAB R. BURNDY F. JERROLD S. SEALECTRO G. AUGAT T. SAMTECH H. CONCORD U. HERMAN H. SMITH I. ARIES V. J. E. F. JOHNSON W. WALDOM-MOLEX K. KING X. MILL-MAX L. AIM ELECTRONICS Y. TRW/CINCH M. 3M Z. MISCELLANEOU BACK TO TOP
DIODE, ZENER, & SCR NUMBERING SYSTEM DS X XXXXXXX ________________| | |___ | | | DIODE, ZENER, & SCR | IDENTIFICATION ------------------- | -------------------------------------------- ______________________| Up to seven digits of the base number, | INCLUDING LETTERS, if they are used to TYPE OF DEVICE identify critical factors peculiar to that ------------------------------- device. A. B. EXCEPTION: When numbering Zener diodes C. TEMPERATURE COMP. DIODE (third digit of W, X, Y, or Z), the next D. DUAL SWITCHING DIODE four numbers will represent "volts and E. FIELD EFF. CURR. REG. DIODE tenths of volts" (i.e. A 4.7 volt Zener F. will be coded "D__0047", and an 120 volt G. Zener will be coded "D__1200", EACH H. HOT CARRIER DIODE FOLLOWED BY A LETTER FROM THE FOLLOWING I. LIST THAT BEST IDENTIFIES THE CASE STYLE. J. SCR K. ZENER CASE STYLE L. -------------------------------------------- M. A. DO7 (51-02, DO-204AA) N. REFERENCE DIODE B. DO35 (299-02, DO-204AH) O. TRANSIENT VOLT. SUPPRESSOR C. DO41 (59-03) P. D. Q. E. R. RECTIFIER F. S. SIGNAL DIODE G. T. TUNNEL DIODE H. U. SCHOTTKY BARIER DIODE I. V. SWITCHING DIODE J. W. ZENER DIODE, 0.5 WATT K. X. ZENER DIODE, 1.0 WATT L. Y. ZENER DIODE, 5.0 WATT M. Z. ZENER DIODE, >5.0 WATT N. BACK TO TOP
ENCODER NUMBERING SYSTEM EC X XXXXXXX _______________________| | |__ | | | ENCODER | IDENTIFICATION ------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER --------------------------------------------------------------------------- A. N. B. O. C. P. H.HEWLETT PACKARD Z. BACK TO TOP
EPOXY, POTTING, OR THERMAL COMPOUND NUMBERING SYSTEM EP X XXXXXXX _________________| | |__ | | | EPOXY, POTTING, AND | | THERMAL COMPOUND | IDENTIFICATION ------------------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. OMEGA C. P. D. Q. E. R. F S. G. T. THERMALLOY, INC. H. U. I. V. J. W. WAKEFIELD K. X. L. Y. M. Z. BACK TO TOP
FAN OR BLOWER NUMBERING SYSTEM FB X XXXXXXX ____________________| | |__ | | | FAN OR BLOWER | IDENTIFICATION ------------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. PAMOTOR D. Q. E. R. ROTRON F. S. G. T. H. U. I. V. J. W. K. X. L. LINEAR TECHNOLOGY Y. M. MCLEAN ENGINEERING Z. BACK TO TOP
FUSE, CIRCUIT BREAKER, ETC. NUMBERING SYSTEM FC X X XXXXXX _____________| | | |__________ | | | | FUSE, CIRCUIT BREAKER, ETC. | | CURRENT CAPABILITY (AND TIME-DELAY CURVE --------------------------- | | WHEN USED FOR CIRCUIT BREAKERS) _______________________| | ----------------------------------------- | | Capability expressed in "Amps and tenths TYPE OF DEVICE | of Amps" (i.e. 1.5A is coded "015", ¼ is ------------------------------- | 0250, and 25A is coded "250") and, when A. 3AG INSTANT BLOW | used with circuit breakers, an additional B. 3AG SLOW BLOW | two digits will indicate the appropriate C. PANEL MT. 3AG FUSE HOLDER | time-delay curve for this particular D. IN-LINE 3AG FUSE HOLDER | breaker if known ("-3" indicates curve 3, E. PC MOUNT IN-LINE HOLDER | and a"-9" indicates "unknown or F. SURFACE MOUNT FUSE | unlisted”). G. AGX FAST BLOW | H. | EXCEPTION: FCC, FCD, FCE, FCF, AND FCX I. | WILL BE FOLLOWED BY UP TO SIX DIGITS J. | OF THE MANUFACTURER’S PART NUMBER. K. | L. | M. | N. | O. | P. PICO FUSE | Q. |_____ R. | S. SINGLE POLE CIRCUIT BREAKER MANUFACTURER T. DOUBLE POLE CIRCUIT BREAKER -------------------------------------------- U. TRIPLE POLE CIRCUIT BREAKER 1. LITTLEFUSE 2. BUSS V. QUAD. POLE CIRCUIT BREAKER 3. HEINEMAN 4. POTTER & BRUMFIELD W. X. POWER CONTACTER Z. SPECIAL NOTE IN CAT "DESCRIPTION" BACK TO TOP
ELECTRONIC FILTER NUMBERING SYSTEM FE X XXXXXXX __________________| | |__ | | | ELECTRONIC FILTER | IDENTIFICATION ----------------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. CORCOM P. D. Q. E. R. F. S. SPRAGUE J. JMK, INC T. M. Z BACK TO TOP
GLASS NUMBERING SYSTEM GL X XXXXXXX ________________________| | |__ | | | GLASS | IDENTIFICATION ----- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. O. C. P. M. Z. BACK TO TOP
HANGER, CABLE CLAMP, ETC. HA X X XXXXXX ____________| | | | | | | IDENTIFICATION HANGER, CABLE CLAMP, ETC. | | -------------- ------------------------- | | Sequentially assigned four digit number ________________________| | starting with "0001" for each manufacturer | | OR up to thirteen digits of the MPN. | | MANUFACTURER DEVICE ------------ ------ A. A. CABLE CLAMP M. MCMASTER-CARR R. RETAINER BACK TO TOP
HIRES PARTS SPECIAL ORDER NUMBERING SYSTEM HR X XXXXXXX ______________________| | |__ | | | HIRES PART | IDENTIFICATION ---------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. ASSOCIATED SPRING CORP N. STANDARD PRODUCTS CO B. BERRY BEARING CO O. SNAP-ON TOOLS C. CENTRAL STEEL & WIRE P. CONSOLIDATED DIVERSIFIED D. CASTER CORP Q. MEMTECH INC E. CHESTER INC R. ALBION F. FARM & FLEET S. SAVA INDUSTRIES G. GRAIN SYSTEMS INC T. NEWARK ELECTRONICS H. McGILL MANUFACTURING CO U. I. ROMLAIR VENTILATOR CO V. MAXWELL SALES J. FLUID POWER ENG. CO W. SHERWIN WILLIAMS K. KURLAND STEEL X. L. ALM Y. M. McMASTER-CARR Z. BACK TO TOP
HEAT SINK NUMBERING SYSTEM HS X XXXXXXX ______________________| | |__ | | | HEAT SINK | IDENTIFICATION --------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. APEX MICROTECHNOLOGY CORP N. B. O. C. P. D. Q. E. R. F. S. G. T. THERMALLOY H. U. I. V. VENTURE J. W. WAKEFIELD K. X. L. Y. M. Z. MISCELLANEOUS BACK TO TOP
HYBRID CIRCUIT NUMBERING SYSTEM HY X XXXXXXX ____________________| | |__ | | | HYBRID CIRCUIT | IDENTIFICATION -------------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. BURR-BROWN N. B. SIEMENS O. C. P. PHILLIPS D. DATEL Q. E. R. ARTESYN F. S. G. T. H. HYBRID U. I. UNIV OF ILLINOIS V. J. W. K. X. ZELTEX L. Y. M. MINI-CIRCUITS Z. BACK TO TOP
THROUGH-PIN INTEGRATED CIRCUIT NUMBERING SYSTEM I X X XXXXXXX __________________| | | |____ | | | | THROUGH PIN I.C. | | DEVICE IDENTIFIER ---------------- | | ---------------------------------------- _________________| | Up to thirteen digits of the base number | | (and letters IF they are used to DEVICE (FROM I.C.MASTER) | identify critical characteristics which -------------------------------- | are peculiar to that device). D. DIGITAL & SIGNAL PROCESSING | I. INTERFACE | EXCEPTION #1: CUSTOM/SEMICUSTON AND PRO- L. LINEAR | GRAMMABLE LOGIC devices (such as pals) M. MEMORY | which have been programmed will use "_" N. CUSTOM/SEMICUSTOM AND | followed by up to six digits to identify PROGRAMMABLE LOGIC | it's program. P. MICRO-PROCESSOR | Z. MISCELLANEOUS | ______________| | CATAGORY (FROM I.C. MASTER) ---------------------------------- IF SECOND LETTER IS "D", USE: ---------------------------------------------------------------------------- A. CMOS N. 10E B. ECL-10K O. 10EL C. ECL-100K P. 100E D. ECL-III Q. 100EL E. TTL R. F. TTL-S S. SPECIAL G. TTL-LS T. TTL-ABT H. TTL-H U. I. MISCELLANEOUS J. ECL-10KH K. TTL-AS L. TTL-ALS M. TTL- F IF SECOND LETTER IS "I", USE: ---------------------------------------------------------------------------- A. ANALOG SWITCH W/ DRIVERS N. MEMORY AND PERIPHERAL DRIVERS B. ANALOG SWITCH W/O DRIVERS O. SENSE AMPLIFIERS C. ANALOG MULTIPLEXERS P. SERIAL TRANSMITTERS-RECEIVERS D. ANALOG DRIVERS Q. E. A TO D BINARY OUT R. F. A TO D DECIMAL OUT S. G. D TO A CONVERTERS T. H. DISPLAY DRIVERS I. ERROR CHECKING CIRCUITS J. KEYBOARD ENCODERS K. LINE DRIVERS L. LINE RECEIVERS M. LINE TRANSIEVERS (CONTINUED - NEXT PAGE) CONTINUATION OF THROUGH-PIN INTEGRATED CIRCUIT NUMBERING SYSTEM IF SECOND LETTER IS "L", USE: ---------------------------------------------------------------------------- A. SPECIAL PURPOSE AMPLIFIERS N. SINGLE SUPPLY OP-AMP B. TRANSISTOR ARRAYS O. WIDE BAND OP-AMP (SEE "TM_ _______") P. PHASE LOCKED LOOP CKT. C. SPECIAL ARRAYS Q. TELECOMMUNICATION CKT. D. COMPARATORS R. TIMERS E. CONSUMER CIRCUITS S. FIXED VOLTAGE REGULATORS F. FOLLOWERS T. ADJUSTABLE VOLTAGE REGULATORS G. GENERAL PURPOSE OP-AMP U. SWITCHING VOLTAGE REGULATORS H. HIGH OUTPUT CURRENT OP-AMP V. MISCELLANEOUS LINEAR DEVICES I. HIGH SPEED OP-AMP W. J. HIGH VOLTAGE OP-AMP K. LOW BIAS CURRENT OP-AMP L. LOW POWER OP-AMP M. PROGRAMMABLE OP-AMP IF SECOND LETTER IS "M", USE: ---------------------------------------------------------------------------- A. CHARACTER GENERATORS N. SHIFT REGISTER - STATIC B. CODE CONVERTERS O. CAM (CONTENT ADDRESSABLE MEMORY) C. EAROM P. EEPROM D. FIFO,LIFO Q. E. PLA (DO NOT USE) R. F. EPROM S. G. PROM T. H. RAM - DYNAMIC I. RAM - BUBBLE J. RAM - CCD K. RAM - STATIC L. ROM - STATIC M. SHIFT REGISTOR - DYNAMIC IF SECOND LETTER IS "N", USE: ---------------------------------------------------------------------------- A. GATE ARRAYS B. LINEAR AND LINEAR/DIGITAL ARRAYS C. PROGRAMMABLE LOGIC D. ECL PROGRAMMABLE LOGIC E. CMOS PROGRAMMABLE LOGIC IF SECOND LETTER IS "P", USE: ---------------------------------------------------------------------------- A. MICROPROCESSOR IF SECOND LETTER IS "Z" ---------------------------------------------------------------------------- DEVICES WHICH DO NOT FALL INTO ONE OF THE MAJOR CATAGORIES LISTED ABOVE WILL BE PREFIXED "IZ", FOLLOWED WITH UP TO EIGHT CHARACTERS FROM THE MPN WHICH BEST IDENTIFY THE DEVICE BACK TO TOP
SURFACE MOUNT INTEGRATED CIRCUIT NUMBERING SYSTEM J X X X XXXXXX ________________| | | | |_____________________________________ | ______| | |_____ | SURFACE MOUNT I. C. | | | | ------------------- | | PACKAGE STYLE | ________| | --------------------------------------- | | | A. FP 2 Sided Flat Pack | DEVICE (FROM I.C. MASTER) | B. LCCC Leadless Ceramic Chip Carrier | ------------------------- | C. PLCC Plastic Leaded Chip Carrier | D. DIGITAL & SIGNAL PROCESSING | D. QFP Quad Pack (4 Sided) | I. INTERFACE | E. SO Small Outline-JEDEC NARROW | L. LINEAR | F. SOL Small Outline-JEDEC WIDE | M. MEMORY | G. SOP Small Outline-EIA | N. CUSTOM/SEMICUSTOM AND | H. QSOP Small Outline-EIA | PROGRAMMABLE LOGIC | I. SSOP Shrink Small Outline | P. MICRO-PROCESSOR | J. TSSOP Thin Shrink Small Outline | Z. MISCELLANEOUS | K. TSOP Thin Small Outline | | L. VSOP Very Small Outline | | | | ________________________________| | | | DEVICE IDENTIFIER | ------------------------------------------ | Last three to nine digits of the base | number (and letters IF they are used to | identify critical characteristics which _______________| are peculiar to the device. | | EXCEPTION #1: CUSTOM/SEMICUSTOM AND CATAGORY (FROM I.C. MASTER) PROGRAMMABLE DEVICES (such as PALSs) which ------------------------------ have been programmed will use up to six digits to identify it's program. IF SECOND LETTER IS "D", USE: ---------------------------------------------------------------------------- A. CMOS N. 10E B. ECL-10K O. 10EL C. ECL-100K P. 100E D. ECL-III Q. 100EL E. TTL R. F. TTL-S S. SPECIAL G. TTL-LS T. TTL-ABT H. TTL-H U. LVT-ABT I. MISCELLANEOUS V. GTL J. ECL-10KH W. LVCH K. TTL-AS X. ALVC L. TTL-ALS M. TTL-F IF SECOND LETTER IS "I", USE: ---------------------------------------------------------------------------- A. ANALOG SWITCH W/ DRIVERS N. MEMORY AND PERIPHERAL DRIVERS B. ANALOG SWITCH W/O DRIVERS O. SENSE AMPLIFIERS C. ANALOG MULTIPLEXERS P. SERIAL TRANSMITTERS-RECEIVERS D. ANALOG DRIVERS Q. E. A TO D BINARY OUT R. F. A TO D DECIMAL OUT S. G. D TO A CONVERTERS T. H. DISPLAY DRIVERS I. ERROR CHECKING CIRCUITS J. KEYBOARD ENCODERS K. LINE DRIVERS L. LINE RECEIVERS M. LINE TRANCEIVERS (CONTINUED - NEXT PAGE) CONTINUATION OF SURFACE MOUNT INTEGRATED CIRCUIT NUMBERING SYSTEM IF SECOND LETTER IS "L", USE: ---------------------------------------------------------------------------- A. SPECIAL PURPOSE AMPLIFIERS N. SINGLE SUPPLY OP-AMP B. TRANSISTOR ARRAYS O. WIDE BAND OP-AMP (SEE "TM_ _______") P. PHASE LOCKED LOOP CKT. C. SPECIAL ARRAYS Q. TELECOMMUNICATION CKT. D. COMPARITORS R. TIMERS E. CONSUMER CIRCUITS S. FIXED VOLTAGE REGULATORS F. FOLLOWERS T. ADJUSTABLE VOLTAGE REGULATORS G. GENERAL PURPOSE OP-AMP U. SWITCHING VOLTAGE REGULATORS H. HIGH OUTPUT CURRENT OP-AMP V. MISCELLANEOUS LINEAR DEVICES I. HIGH SPEED OP-AMP W. J. HIGH VOLTAGE OP-AMP K. LOW BIAS CURRENT OP-AMP L. LOW POWER OP-AMP M. PROGRAMMABLE OP-AMP IF SECOND LETTER IS "M", USE: ---------------------------------------------------------------------------- A. CHARACTER GENERATORS N. SHIFT REGISTER - STATIC B. CODE CONVERTERS O. CAM (CONTENT ADDRESSABLE MEMORY) C. EAROM P. EEPROM D. FIFO, LIFO Q. E. PLA (DO NOT USE) R. F. EPROM S. G. PROM T. H. RAM - DYNAMIC I. RAM - BUBBLE J. RAM - CCD K. RAM - STATIC L. ROM - STATIC M. SHIFT REGISTER - DYNAMIC N. SHIFT REGISTER - STATIC O. CAM (CONTENT ADDRESSABLE MEMORY) IF SECOND LETTER IS "N", USE: ---------------------------------------------------------------------------- A. GATE ARRAYS B. LINEAR AND LINEAR/DIGITAL ARRAYS C. PROGRAMMABLE LOGIC IF SECOND LETTER IS "P", USE: ---------------------------------------------------------------------------- A. MICROPROCESSOR IF SECOND LETTER IS "Z" ---------------------------------------------------------------------------- DEVICES WHICH DO NOT FALL INTO ONE OF THE MAJOR CATAGORIES LISTED ABOVE WILL BE PREFIXED "JZ", FOLLOWED WITH UP TO FOURTEEN CHARACTERS FROM THE MPN WHICH BEST IDENTIFY THE DEVICE. BACK TO TOP
KNOB OR COLLAR NUMBERING SYSTEM KC X XXXXXXX ____________________| | |__ | | | KNOB OR COLLAR | IDENTIFICATION -------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. ALCO N. B. O. C. P. M. Z. BACK TO TOP
LAMP OR LENS NUMBERING SYSTEM LL X XXXXXXX _____________________| | |__ | | | LAMP OR LENS | IDENTIFICATION ------------ | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. NASCO-FORT ATKINSON B. O. C. P. D. DIALIGHT CORP. Q. E. EMF CO. R. F. S. SUNNEX, INC. G. GENERAL INSTRUMENT CORP. T. H. U. I. V. J. W. K. X. LUXO L. SYLVANIA Y. M. MCMASTER CARR Z. BACK TO TOP
RELAY NUMBERING SYSTEM LY X XXXXXXX ________________________| | |__ | | | RELAY | IDENTIFICATION ----- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. O. OMRON ELECTRONICS C. CRYDOM CO P. POTTER & BRUMFIELD D. Q. E. R. F. S. G. T. H. U. I. V. J. W. K. X. L. Y. M. MAGNECRAFT Z. BACK TO TOP
MYLAR OR FILM NUMBERING SYSTEM MF X XXXXXXX ____________________| | |__ | | | MYLAR OR FILM | IDENTIFICATION ------------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. BISHOP O. C. P. M. Z. BACK TO TOP
MISCELLANEOUS NUMBERING SYSTEM MI XX XXX ____________________| | |____ | | | MISCELLANEOUS | IDENTIFICATION ------------- | ------------------------------------------- _______________________| Sequentially assigned three digit number | starting with "001" each calendar year | for all equipment not specifically | identifiable in other categories of this CALENDAR YEAR index. ---------------------------------------------------------------------------- ENTER "82" FOR 1982. ENTER "83" FOR 1983. ENTER "00" FOR 2000. ENTER "84" FOR 1984. ENTER "85" FOR 1985. ENTER "01" FOR 2001. ENTER "86" FOR 1986. ENTER "87" FOR 1987. ENTER "02" FOR 2002. ENTER "88" FOR 1988. ENTER "89" FOR 1989. ENTER "03" FOR 2003. ENTER "90" FOR 1990. ENTER "91" FOR 1991. ENTER "04" FOR 2004. ENTER "92" FOR 1992. ENTER "93" FOR 1993. ENTER "05" FOR 2005. ENTER "94" FOR 1994. ENTER "95" FOR 1995. ENTER "06" FOR 2006. ENTER "96" FOR 1996. ENTER "97" FOR 1997. ENTER "07" FOR 2007. ENTER "98" FOR 1998. ENTER "99" FOR 1999. ENTER "08" FOR 2008. BACK TO TOP
METAL NUMBERING SYSTEM ML X XXXX ________________________| | |____ | | | METAL | IDENTIFICATION ----- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. N. B. R. L. BROWNFIELD CO, INC. O. C. P. D. Q. E. R. F. S. SILVER MACHINE SHOP G. T. H. U. I. V. J. W. K. KURLAND STEEL X. L. Y. M. Z. BACK TO TOP
MOTOR NUMBERING SYSTEM MO X XXXX ________________________| | |____ | | | MOTOR | IDENTIFICATION ----- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. M. Z. BACK TO TOP
MACHINED PART NUMBERING SYSTEM MP X XXXXXXXXXXXXX ____________________| | |__________ | | | MACHINED PART | MFG. PART NO. OR DRAWING NO. ------------- | -------------------------------------------- ________________________| Four to thirteen digit abbreviation of the | Mfg. P/N or, if manufactured from a U of I | drawing, use up to seven digits to | designate the drawing number (i.e. A part | made from U. of I. Drawing No. LC95-M03 | will be coded "MPULC9503", or a part from | U. of I. Drawing No. SC80-M70C will be | coded "MPUSC8070C", or a variance of the | PC classification (i.e. a pc board that | has an ipn PCVMEB015 will have a front panel | named MPEVME015FP). Use FP = FRONT PANEL, | TF = TRANSITION MODULE FRONT PANEL, and, | TM = TRANSITION MODULE at the end if needed. | MANUFACTURER ---------------------------------------------------------------------------- A. AMERICAN ALUMINUM CO. N. NUMERICAL CONCEPT MACNINE & MANUFACTURING B. O. C. CARDINAL ALUMINUM CO. P. PERFECTION MICA INC. D. HARLAN & LASH Q. E. ELECTRONIC SOLUTIONS R. F. S. ULTRA SPECIALTIES G. T. H. SAMUEL HARRIS & CO. U. UNIVERSITY OF ILLINOIS I. CONSOLIDATED DIVERSIFIED V. VENTURE PRECISION MACHINE CO. J. W. K. X. L. PLASTRUCT Y. M. Z. BACK TO TOP
METER & ASSOCIATED EQUIPMENT NUMBERING SYSTEM MR X XXXXXXX ________________________| | |__ | | | METER, ETC | IDENTIFICATION ---------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. D. Q. E. EMPRO R. F. S. SIMPSON M. Z. BACK TO TOP
MACHINE SCREW, KEP, NUT, WASHER, ETC. NUMBERING SYSTEM MS X XX X XXX X ____________| | | | | |_________________________________ | | | | |__ | MACHINE SCREW, KEP, NUT, | | | | | WASHER, ETC. | | | LENGTH | ----------------------------- | | |_ ----------------------------------- | ____________________________| | | Length in inches and hundredths | | _________________| | (i.e. 1/4" will be coded "025", | | | | and 1 1/2" will be coded "150"). | SIZE THREADS/INCH | EXCEPTIONS: | -------- ------------------------- | A. "000" indicates a KEP. | 0. #0 Expressed in two figures. | B. "900" indicates a NUT. | 2. #2 EXCEPTIONS: | C. "800" indicates a LOCK WASHER. | 4. #4 A. Enter "NA" where | D. "700" indicates a FLAT WASHER. | 5. #5 thread size does not | E. "600" indicates an ESNA DEVICE. | 6. #6 apply. | F. "950" indicates a small pattern | 8. #8 B. Enter "ST" for self- | nut. | M. METRIC tapping screw. | | X. #10 | | C. For Metric-Enter the | | size of the screw. | | Ex. M2.5X8 should be | | 25 | | _____________________________| ___________________________| | | SCREW TYPE MATERIAL -------------------------------------- -------------------------------- A. PAN HEAD N. NOT APPLICABLE B. BRASS B. BINDER HEAD O. F. FIBER C. P. M. STEEL (or other Ferous metal) D. Q. N. NYLON E. R. ROD (OR STUD) S. STAINLESS STEEL F. FLAT HEAD S. SPECIAL APPLICATION T. TEFLON G. T. X. STEEL W/ZINC PLATING H. U. Z. N/A I. V. J. W. K. X. L. FILISTER HEAD Y. M. Z. BACK TO TOP
OPTOELECTRONIC NUMBERING SYSTEM OE X XXXXXXX ____________________| | |__ | | | OPTOELECTRONIC | IDENTIFICATION -------------- | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. AND DISPLAY PRODUCTS N. NATIONAL B. AMERICAN BRIGHT OPTO. CORP. O. LUMEX OPTO/COMPONENTS INC. C. P. D. DIALIGHT Q. E. R. F. S. G. GENERAL ELECTRIC T. TEXAS INSTRUMENTS H. HEWLETT-PACKARD U. I. INDUSTRIAL DEVICES, INC. V. J. W. K. X. L. SIEMENS (LITRONIX) Y. M. MONSANTO Z. BACK TO TOP
O-RING NUMBERING SYSTEM OR X XXXXXXX ________________________| | |__ | | | O-RING | IDENTIFICATION ------ | -------------------------------------------- ________________________| Up to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. M. Z. BACK TO TOP
PAPER & PRINTING SUPPLIES NUMBERING SYSTEM PA X XXXXXXX ________________________| | |__ | | | PAPER | IDENTIFICATION ----- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. BRAD O. C. CAL-ABCO PERIPHERALS P. BROADSIDE PRESS D. Q. E. R. F. S. G. GRAPHIC CONTROLS T. H. HUEY U. I. MINOLTA V. J. W. K. K & E X. L. Y. M. MILLER DIAL CORP. Z. BACK TO TOP
PIN OR BUS BAR NUMBERING SYSTEM PB X XXXXXXX ____________________| | |__ | | | PIN OR BUS BAR | IDENTIFICATION -------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. D. Q. E. R. ROGERS CORP. F. S. G. T. H. U. I. V. J. W. K. X. L. LEAR-SIEGLER Y. M. Z. BACK TO TOP
PRINTED CIRCUIT BOARD NUMBERING SYSTEM PC XX XXXXXXXX ________________| || |______________________________________ | || | PRINTED CIRCUIT BOARD ||_________________ | --------------------- | | | _______________________| (OBSOLETE NUMBERING SYSTEM) | | TYPE OF BOARD-IF 2ND NUMBER | TYPE OF BOARD-IF BOTH ARE CHARACTERS ------------------------------- | ------------------------------------ 1ST 2ND DIGIT(WIDTH) | FB = FASTBUS CIRCUIT BOARD DIGIT IF A FRONT PANEL | LE = LE CIRCUIT BOARD --------- ---------------- | VM = VME CIRCUIT BOARD A.C.E. CKT. BOARD 1. ONE UNIT | XE = XE CIRCUIT BOARD F. FASTBUS CKT BOARD 2. TWO UNITS | PR = PROTOTYPE BOARD G. FASTBUS F.P. 3. THREE UNITS | Z = MISCELLANEOUS L. L.E. CKT. BOARD 4. FOUR UNITS | M. L.E. F.P. 9. OTHER | P. F.E. CKT. BOARD 0. N/A | Q. F.E. F.P. | S. S.E. F.P. | U. VME CKT. BOARD | V. VME F.P. | W. MARK III BOARD | X. X.E. CKT. BOARD | Z. MISCELLANEOUS | _________________________________________________________________| | _____________________________| | | | (OBSOLETE NUMBERING SYSTEM) IDENTIFICATION ------------------------------------- -------------------------------- Sequentially assigned three digit Assign up to eight digit alpha- number within each board type (IE. numeric number which includes the L.E. CKT. BOARD, F.E. P.P.(Front board number(IE. 86B15, E33C15). Panel), MISCELLANEOUS, ETC). The eight digit variable number may _________________________________________ include a one digit letter that represents: A two character suffix can be included in the eight digit number that represents: 1 CHARACTER INFIX -------------- 2 CHARACTER SUFFIX(OPTIONAL) A = ASSEMBLY ---------------------------- B = PHYSICAL BOARD FP = FRONT PANEL C = CIRCUIT(SCHEMATIC) TF = TRANSITION MODULE FRONT PANEL F = FINISHED PROJECT TM = TRANSITION MODULE P = PARTS KIT BP = BACKPLANE PC Boards designed by the HEPG use a board number which is put into 2 categories. The 1st category has the board family in the number and the 2nd category is an indices of the board family. For example: with an XE84B08 the "XE" is the type of board, the "84" is the family number, the "B" is the infix number representing the physical board, and the "08" is an indices of the 84 family. The VME family doesn't adhere to the Family/Indices representation and uses the "E" as the family number. In reality the VME is not only the type name but the family number. The "E" is used as the family number to make the representation match the Family/Indices numbering scheme. PC Type Family # 1 Character Infix # Indices # 2 Character suffix # PC XE 84 B 08 PC VM E B 016 FP IF 3RD LETTER IS A "Z" OR "PR" ASSIGN UP TO 13 CHARACTERS USING THE MANUFACTURER'S NUMBER OR IF NO MANU. NUMBER ASSIGN A SEQUENTIAL NUMBER UP TO 8 DIGITS Examples: PCVMEB016FP PHYSICAL PCBOARD VME016, FRONT PANEL PCZ0001 MISC. BOARD BACK TO TOP
PHOTO TUBE OR CRT NUMBERING SYSTEM PH X XXXXXXX _________________| | |__ | | | PHOTO TUBE OR CRT | IDENTIFICATION ----------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. O. C. P. D. Q. E. R. F. S. G. T. H. U. UNITED DETECTOR I. V. J. W. K. X. L. SIEMENS (LITRONIX) Y. M. Z. BACK TO TOP
REPAIRED ITEM NUMBERING SYSTEM PI X XXXX ___________________| | |____ | | | REPAIRED ITEM | IDENTIFICATION ------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. ARGUS FIRE CONTROL N. B. BERG/DuPONT O. C. P. M. Z. BACK TO TOP
PUMP NUMBERING SYSTEM PM X XXXXXXX _________________________| | |__ | | | PUMP | IDENTIFICATION ---- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. O. C. P. M. MC MASTER - CARR Z. BACK TO TOP
POWER SUPPLY NUMBERING SYSTEM PS X XXXXXXX _____________________| | |__ | | | POWER SUPPLY | IDENTIFICATION ------------ | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. POWER/MATE CORP. N. B. O. C. P. POWER-ONE D. Q. E. R. F. S. G. POWER GENERAL T. H. LH RESEARCH U. I. INTERNATIONAL POWER V. J. W. K. X. L. LAMBDA Y. M. Z. SPECIAL NOTE IN CAT "DESCRIPTION" BACK TO TOP
POTENTIOMETER NUMBERING SYSTEM PT XXX X X X X X ____________________| | | | | | |_______________________________ | | | | | |_______________________________ | POTENTIOMETER | | | |________ | | ------------- | | | | | | ______________________| | | MATERIAL & MOUNTING | | | | | --------------------------------- | | RESISTANCE VALUE | | 1. WIRE WOUND, P.C. MOUNT | | --------------------------------- | | 2. WIRE WOUND , PANEL MOUNT | | Maximum resistance value expressed | | 3. CERMET, P.C. MOUNT | | in three figures, the first two | | 4. CERMET, PANEL MOUNT | | are significant figures and the | | 5. | | third is the multiplier. | | 6. | | | | 7. | | | | 8. | | | | 9. | | __________________________| |_ | | | | | | MANUFACTURER TYPE | | ------------------------------------ ---------------------------------- | | A. BECKMAN N. A. 3009Y N. 3339H | | B. BOURNS O. B. 3099P O. 3386S | | C. CLAROSTAT P. C. 3059L P. RT24C | | D. CTS CFVA Q. D. 3082P Q. 73JA5K | | E. CRL JMJ R. E. 20P R. LM3090 | | F. S. F. RTR24D S. CD4797 | | G. T. G. RJ24F T. EF5259 | | H. U. H. 260P U. JML102 | | I. V. I. 3262W V. 3006P | | J. W. J. RJ26F W. | | K. X. K. 275 X. | | L. Y. L. 3290H Y. | | M. Z. M. 3329H Z | | | | ________________________________________________________________| | | _____| | | CONTACT PATTERN ADJUSTMENT -------------------------------------------------------------- ------------- A. P.C. MOUNT, CENTERED, IN-LINE N. F. FRONT B. P.C. MOUNT, OFF-CENTER, IN-LINE O. S. SIDE C. P.C. MOUNT, STAGGERED, IN-LINE P. T. TOP D. P.C. MOUNT, D.I.P. Q. E. P.C. MOUNT, HOOK-UP WIRE R. F. PANEL MOUNT, SOLDER LUG S. G. PANEL MOUNT, HOOK-UP WIRE T. H. P.C. MOUNT, TRIANGULAR PATTERN U. I. V. J. W. K. X. L. Y. M. Z. BACK TO TOP
PUBLICATION NUMBERING SYSTEM PU X XXXX _____________________| | |____ | | | PUBLICATION | IDENTIFICATION ----------- | -------------------------------------------- ____________________| Sequentially assigned four digit number | starting with "0001" for each individual AUTHOR OR PUBLISHER author or publisher. ---------------------------------------------------------------------------- A. HARRIS PUBLISHING CO. N. B. HOWARD W. SAMS O. C. CHANIMAR ACE P. D. Q. E. EIA ADMINISTRATION DEPT. R. F. S. I.E.E.E. G. GERBER SYSTEMS CORP. T. THOMAS PUBLISHING CO. H. HEARST U. I. V. VITA J. W. K. X. L. LAB SAFETY SUPPLY Y. M. Z. BACK TO TOP
RESISTOR NUMBERING SYSTEM R X X XX X X _______________________| | | | | |_________________________________ | | | | |_______________________________ | RESISTOR | | | | | -------- __________________| | |___________ | | | | | | | PHYSICAL DESCRIPTION | TWO SIGNIFICANT NUMBERS (SEE *) | | ------------------------------ | ---------------------------------- | | A. DISC, FILM, W/LEADS | Use standard resistance coding for | | B. DISC, FILM, SURFACE MOUNT | first two significant figures. | | C. DISC, FILM, W/FORMED LEADS | | | D. DISC, COMP, W/ LEADS | _____________________________| | E. DISC, COMP, SURFACE MOUNT | | | F. DISC, COMP, W/FORMED LEADS | MULTIPLIER | G. DISC, WIRE, W/LEADS | -------------------------------------- | H. | 0 = X 0 5 = X 100,000 | I. | 1 = X 10 6 = X 1,000,000 | J. | 2 = X 100 7 = SPECIAL VALUE | K. FILM, 4-PIN SIP | 3 = X 1,000 | L. FILM, 5-PIN SIP | 4 = X 10,000 | M. FILM, 6-PIN SIP | | N. FILM, 8-PIN SIP | | O. FILM, 9-PIN SIP | ___________________________________| P. FILM, 7-PIN SIP | | Q. FILM,10-PIN SIP | | S. SPECIAL (See Cat. Desc.) | TOLERANCE T. TERMINATING NETWORK | ------------------------------------------ U. FILM, 14 PIN DIP SFC MOUNT | 0 = 20% 1 = 10% 2 = 5% 3 = 2% V. FILM, 16 PIN DIP SFC MOUNT | 4 = 1% 5 = .1% 6 = .01% 7 = .001% W. FILM, 14 PIN DIP | 8 = 9 = X. FILM, 16 PIN DIP | Z. WIRE ______________| | POWER/PACKAGING CHARACTERISTICS ---------------------------------------------------------------------------- A. <1/8W, COMMON POWER TAP N. 1/4W, DISCRETE POWER TAP B. <1/8W, DISCRETE POWER TAP O. 1/4W, SPECIAL NETWORK C. <1/8W, SPECIAL NETWORK P. 1/4W, DISCRETE POWER TAP, <2% D. <1/8W, DISCREET POWER TAP, <2% Q. >1/4W, SPECIAL NETWORK E. R. F. S. SPECIAL (See Cat. Desc.) G. 1/8W, COMMON POWER TAP T. TO-120 PACKAGE H 1/8W, DISCRETE POWER TAP U. TO-126 PACKAGE I. 1/8W, SPECIAL NETWORK V. J. 1/8W, DISCRETE POWER TAP, <2% W. K. X. 1/2W, DISCRETE POWER TAP, <2% L. Y. >1/2W, DISCRETE POWER TAP M. 1/4W, COMMON POWER TAP Z. >1/2W, DISCRETE POWER TAP, <2% * EXCEPTIONS: ---------------------------------------------------------------------------- 1. TERMINATING NETWORKS will indicate the two significant digits of each resistor by using the next four figures (i.e. a 220/330 ohm network is coded "RTI2233"). 2. 1% OR SMALLER TOLERANCE RESISTORS GREATER THAN 100 OHMS (IPN prefix R_J, R_P, R_X, or R_Z) will use 3 digits and multiplier to designate the value and a 5th to designate tolerance(i.e. 105K, 1/2W, 1% is coded "RAX10534"). 3. ALL RESISTORS LESS THAN 10 OHMS AND 1% RESISTORS LESS THAN 100 OHMS (IPN prefix R_J, R_P, R_X, or R_Z) use the industry coding standard of 4 characters (3 digits and "R") with an infixed "R" to designate where the decimal point is and a 5th digit to designate the tolerance value.(i.e. a wire wound 0.51 ohm, 2W,1% resistor is coded "RGZ0R514") BACK TO TOP
SOLDERING EQUIPMENT NUMBERING SYSTEM SE X XXXXXXX ________________| | |__ | | | SOLDERING EQUIPMENT | IDENTIFICATION ----------------------------- | -------------------------------------------- ________________________| UP to thirteen digits of the MPN. | MANUFACTURER ---------------------------------------------------------------------------- A. MASTER APPLIANCE N. B. ESP O. WASSCO C. CERMALLOY P. PLATO PRODUCTS, INC. D. CHEMTRONICS Q. E. TECHCON SYSTEMS, INC. R. F. FRY METALS, INC. S. ELECTRO-SCIENCE LAB G. GARDNER SOLDER CO. T. TECH SPRAY H. H.T.C. U. TOPLINE I. TECHNI-TOOL V. MULTICORE J. W. WELLER K. KESTER X. EXPENDABLES L. MCMASTER-CARR Y. PACE M. 3M Z. ZEPHYTRONICS BACK TO TOP
SPRING NUMBERING SYSTEM SG X XXXX ________________________| | |____ | | | SPRING | IDENTIFICATION ------ | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. ASSOCIATED SPRING CORP. N. B. O. C. P. D. Q. E. R. ASSOCIATED SPRING - RAYMOND F. Z. BACK TO TOP
SPECIAL HARDWARE NUMBERING SYSTEM SH X XXXXXXX __________________| | |__ | | | SPECIAL HARDWARE | IDENTIFICATION ---------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. AMATOM N. B. O. C. CONSOLIDATED DIVERSIFIED P. PANDUIT D. DISPENSIT Q. E. ESNA R. R A F ELECTRONIC HARDWARE, INC F. S. H. H. SMITH G. T. H. U. I. V. J. W. WALDOM K. KEYSTONE X. L. Y. M. MCMASTER CARR SUPPLY CO. Z. BACK TO TOP
SOCKET NUMBERING SYSTEM SO X X XXX XX ________________________| | | | |_ | | | | | SOCKET | | | SPACING ------ | | | --------------------------------------- ____________________________| | | Spacing between pins or rows of pins | | | expressed in hundredths of inches, "01" TYPE | | through "98", and "99" indicating "NA". ------------------------------- | |_______________________________ A. DIP SOLDER TAIL, LO-PROFILE | | B. DIP WIRE WRAP |____ NUMBER OF POSITIONS C. DIP LIF/ZIF | ------------------- D. MOUNTING Number of positions E. SIP SOLDER TAIL -------- in the socket, 001 F. SIP WIRE WRAP C. CHASSIS through 999. G. SIP LIF/ZIF S. SURFACE MOUNT (PCB) H. T. THROUGH PIN (PCB) I. MINIATURE SPRING SOCKET W. WIRE WRAP J. COMPONENT LEAD SOCKET Z.NOT APPLICABLE K. SOCKET POST L. M. CHIP CARRIER N. PIN GRID ARRAY O. BURN-IN/TEST P. PQFP SOCKET R. I.D.C. S. PLCC SOCKET W. WIREMOUNT FOR .050 PITCH X. TUBE Y. TRANSISTOR Z. ADAPTER BACK TO TOP
SPACER NUMBERING SYSTEM SP X X X X X XXX ________________________| | | | | | |_ | | | | | | | SPACER | | | | | LENGTH ------ | | | | | ------------------------------------ ________________________| | | | | O.A.L. expressed in inches and | ___________| | | | hundredths (i.e. 3/4" will be coded MANUFACTURER | _______| | | "075", and 1 1/2" will be coded ------------ | | | | "150", etc.). A. AMATOM | | | |______________________________ B. A.S.M. | | |____ | C. | | | | D. | MATERIEL I.D. THREADS/INCH K. KEYSTONE | --------------- ----------------------- ------------- M. McMASTER-CARR | 1. ALUMINUM A. No. 2 G. 1/4" A. CLEAR R. R. A. F. | 2. BRASS B. No. 4 H. 0.166 B. 56 S. H. H. SMITH | 3. NYLON C. No 6 I. 0.192 C. 40 Z. | 4. PHENOLIC D. No. 8 J. 3/8”(.375) D. 32 _________________| 5. STAINLESS E. No. 10 K. 0.091” E. 24 | F. 1/8” L. 0.115” | SHAPE ---------------------------------------------------------------------------- 1. ROUND 4. SWAGED 7. 2. HEX 5. HINGED 8. 3. MALE/FEMALE 6. NON-ROTATING 9. BACK TO TOP
SLEEVING/TUBING NUMBERING SYSTEM ST X X XXXX ___________________| | | |____ | | | | SLEEVING/TUBING | | IDENTIFICATION --------------- | | ------------------------------------------ | | Sequentially assigned four digit number | | starting with "0001" for each | | manufacturer. ________________________| |__________________________________ | | MANUFACTURER TYPE OF TUBING ----------------------------------------------------------- ---------------- A. ALPHA N. 1. SHRINKABLE B. BELDEN O. 2. POLYFLOW C. ZIPPERTUBING P. 3. SHIELDED D. Q. 4. E. R. 5. F. S. 6. G. T. 7. H. U. 8. I. V. 9. J. W. 0. MISCELLANEOUS K. X. L. Y. M. MCMASTER-CARR Z. BACK TO TOP
SWITCH NUMBERING SYSTEM SW X X X XX X XX ________________________| | | | | | |______ | | | | | | | SWITCH | | | | | SPECIAL DETAILS ------ | | | | | ----------------------------------- ____________________________| | | | | 01. ALCO "TINY" OR EQUAL | ____________| | | | 02. ALCO MINIATURE OR EQUAL TYPE | ______| | | 03. HEXADECIMAL W/COMP, 16 POS ------------------ | | | | 04. ADJUSTABLE STOP, NON-SHORTING A. TOGGLE | NO. OF POLES | | 05. BLACK PUSH BUTTON B. PUSH BUTTON | ------------- | | 06. RED PUSH BUTTON C. ROTARY | 0. N/A | | 07. A.C. POWER SWITCH D. ROCKER | 1. 1 POLE | | 08. LOW PROFILE E. SLIDE | 2. 2 POLES | | 09. BREAK-BEFORE-MAKE F. KEYLOCK | 3. 3 POLES | | 10. MAKE-BEFORE-BREAK G. VANE | 4. 4 POLES | | 11. NON-SHORTING H. HARDWARE * | 5. 5 POLES | | 12. 2 POS DIP I. LOCKING TOGGLE | 6. 6 POLES | | 13. 3 POS DIP J. PIANO, SIDE ACT.| 7. 7 POLES | | 14. 4.POS DIP K. RECESSED SLIDE | 8. 8 POLES | | 15. 5 POS DIP L. | 9. MORE THAN | | 16. 6 POS DIP M. MISCELLANEOUS * | 8 POLES | | 17. 8 POS DIP N. | | | 18. 10 POS DIP Z. N/A | | | 19. LINEAR ACTION _______________| | | 20. FLAT HANDLE | | | 21. LONG HANDLE (.80 INCH) MOUNTING | | 22. OPEN FRAME -------- | | 23. WHITE PUSH BUTTON A. PANEL | | 24. GRAY PUSH BUTTON B. STRAIGHT PC, THREADED BUSHING | | 25. C. RT ANGLE HORIZ. PC | | 26. D. RT ANGLE VERT. PC | | 27. E. D.I.P. | | 28. F. SURFACE | | 29. G. | | 30. H. | | 31. I. | | 32. J. | | 33. S. STRAIGHT PC, SMOOTH BUSHING | | 99. N/A | | _____________________________| | | ___________| NO. OF THROWS | ------------------ SWITCH FUNCTION (Parenthesis indicates "MOMENTARY") Use TWO figures --------------------------------------------------------- (01 through 99) A. ON-ON J. S. to indicate the B. ON-OFF-ON K. T. number of C. ON-(ON) L. U. NONE-ON-(ON) throws (use 00 D. ON-OFF-(ON) M. V. (0N) to indicate N/A). E. ON-ON-(ON) N. (ON)-NONE-ON W. (OFF) F. ON-ON-ON O. (ON)-OFF-(ON) X. PREPROGRAMMED G. ON_OFF P. (ON)-ON-(ON) Y. "C" SWITCHING H. ON-NONE Q. OFF-(ON) Z. I. R. * NOTE: Follow with up to seven digits of the Manufacturer's part number. BACK TO TOP
SHAFT EXTENDER NUMBERING SYSTEM SX X XXXX ____________________| | |____ | | | SHAFT EXTENDER | IDENTIFICATION -------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. M. Z. BACK TO TOP
TRANSISTOR NUMBERING SYSTEM T X X XXXXXXX ______________________| | | |__ | | | | TRANSISTOR | | PART NUMBER ---------- | | ------------------------------------------- ______________________| | Up to thirteen digits of the MPN. | | PACKAGE TYPE | ------------------------------ | A. | B. | C. MULTIPLE, SURFACE MOUNT. | D. SINGLE, SURFACE MOUNT. | M. MULTIPLE, THROUGH-PIN. | S. SINGLE, THROUGH-PIN. | | _____________________________| | TYPE ---------------------------------------------------------------------------- A. DIODE ARRAY N. NPN SILICON B. O. N CHANNEL SILICON FET C. P. PNP SILICON D. DARLINGTON Q. E. R. P CHANNEL SILICON FET F. S. G. T. H. U. I. PNP GERMANIUM V. J. W. K. X. L. P & N CMOS ARRAY Y. M. NPN & PNP MIX Z. BACK TO TOP
TAPE NUMBERING SYSTEM TA X XXXX _________________________| | |____ | | | TAPE | IDENTIFICATION ---- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. N. B. BISHOP GRAPHICS, INC. O. C. P. D. MCMASTER-CARR Q. E. R. F. S. G. GLOBAL COMPUTER SUPPLIES T. H. U. I. V. J. W. K. KROY X. L. LAB SAFETY SUPPLY Y. W.H. BRABY CO M. Z. BACK TO TOP
TEST EQUIPMENT NUMBERING SYSTEM TE X XXXXXXX ___________________| | |__ | | | TEST EQUIPMENT | IDENTIFICATION -------------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. AMPROBE INSTRUMENT N. 3M B. BECKMAN INSTRUMENTS CO. O. C. HEWLETT-PACKARD P. TEST PROBES, INC D. Q. E. E-Z-HOOK R. F. JOHN FLUKE CO. S. HERMAN H. SMITH G. T. TEKTRONICS H. HUNTRON INSTRUMENT, INC. U. I. V. J. W. K. BK PRECISION X. L. MUELLER Y. MCMASTER-CARR M. POMONA ELECTRONICS Z. BACK TO TOP
TOOL NUMBERING SYSTEM TL X XXXX _________________________| | |____ | | | TOOL | IDENTIFICATION ---- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. A.F. STAHLER N. P. K. NEUSES B. BONDHUS O. O.K. MACHINE TOOL CORP. C. TRW/CINCH P. AMP D. DEWALT Q. RYERSON E. E-Z HOOK R. THE ERASER CO. INC. F. ZIPPERTUBING S. DREMEL G. MASTER APPLIANCE T. THOMAS & BETTS H. HARRIS CORP, DRACON DIVISION U. UTICA TOOL CO. I. INTERNATIONAL CARBIDE TOOL, INC. V. IDEAL J. JERROLD W. WALDOM K. PORTASOL X. XCELITE L. McMASTER-CARR Y. DUPONT (BERG) M. 3M Z. MISCELLANEOUS BACK TO TOP
VALVE NUMBERING SYSTEM VL X XXXX ________________________| | |____ | | | VALVE | IDENTIFICATION ----- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer. MANUFACTURER ---------------------------------------------------------------------------- A. N. B. O. C. P. M. Z. BACK TO TOP
WIRE NUMBERING SYSTEM WI X X X XXX _________________________| | | | |___________ | | | |_________ | WIRE | |_________ | WIRE SIZE ---- | | | ------------------------------ ________________________| | | Enter AWG wire size. | | | INSULATION | | EXCEPTIONS: ----------------------------------------- | | 1. For braid, use the decimal A. PVC N. NEOPRENE | | equivalent in two figures. B. WRAPPED TEFLON O. | | 2. For chamber wire, use last C. EXTRUDED TEFLON P. | | three digits to designate D. KYNAR Q. | | the wire diameter. E. GLASS R. | |______________ F. RED TEFLON "CR" S. |_ | G. BLACK TEFLON "CR" T. | USE G. U. TYPE ----------------- H. V. ------------ 1. HOOK-UP WIRE J. W. 1. SOLID 2. WIRE-WRAP WIRE K. X. 2. STRANDED 3. POWER OR SHIELD L. Y. 3. BRAID 9. CHAMBER WIRE M. Z. UNINSULATED BACK TO TOP
TRANSFORMER NUMBERING SYSTEM XF X XXXXXXX _____________________| | |__ | | | TRANSFORMER | IDENTIFICATION ----------- | -------------------------------------------- ________________________| Sequentially assigned four digit number | starting with "0001" for each manufacturer MANUFACTURER OR up to thirteen digits of the MPN. ---------------------------------------------------------------------------- A. N. B. BH ELECTRONICS, INC O. C. P. PULSE ENGINEERING D. Q. E. R. F. S. G. T. H. U. I. V. J. W. K. X. L. Y. M. MINI-CIRCUITS Z. BACK TO TOP
NON-OBJECT PARTS % XXXXXXXXXXXXXX % _______________________| | |___________________ | | | NON-OBJECT PART FLAG | NON-OBJECT PART FLAG -------------------- | -------------------- | PART NUMBER -------------------------------------------------- UP TO FOURTEEN CHARACTERS THAT REPRESENT A NON-OBJECT PART THAT THE HEPG ENGINEERS USE IN THE VERIBEST CAE SOFTWARE. THIS PART WILL BE A NON-OBJECT (NON-PHYSICAL) PART THAT IS ASSIGNED TO A BOARD. (I.E. %MOUNT05% -- MOUNTING HOLE ON A PCB FOR A #5 BOLT.) NOTE: THIS PART NUMBER WILL BE GENERATED BY THE HEPG ENGINEERS AND WILL BE ADDED TO THE IPN DICTIONARY FOR USE WITH THE BILL OF MATERIALS. BACK TO TOP
Page Composed by: Mark Hilger Last Updated: April 14, 1998 For suggestions or comments about this web page contact Todd Moore tcmoore@uiuc.edu